A few days back a dear Ravelry friend piqued my interest in a post when writing about dyeing acrylic yarn. The reason why I was interested is that till date, I’ve been told that you cant dye acrylic: the color doesn’t hold. So how was this going to work?!
Acrylic mainly needs acid dye in commercial quantities to be viable, and to hold the color the way it does. However, HodgePodge Crochet mentions the use of acrylic colors. Seemed interesting and do-able. So the moment I was alone at home, I got to work!
The first hitch came at acrylic paint. The blog doesn’t really say wall paint, but if you read carefully, you’ll understand that that’s what she meant. Now the problem here is that I get a massive headache with the smell of paint. The only paint I was willing to work with was the children’s acrylic paint bottles. The difference: the paint is more diluted and therefore has not significant amount of smell. One more: I don’t need to burn by hands with turpentine if it does manage to get on me; soap works just fine!!!
I did figure I probably need a lot more color than the “squirt” the blogger mentions, but I decided to go ahead anyway.
The reason I was comfortable to go ahead was a stash of “natural” color yarn lying in my stash, and I had no clue how to get rid of it. Ta-Da! Solution found! So out came the hanks (which I hadn’t bothered to wind, Thank God!)
Step 1: Wash the yarn in hot water. Since its summer, the Solar Heater in my bathroom works just fine. So the moment I turned on the tap, nice hot hot water came rushing out. The yarn got soaked in this.
Step 2: I had a spare steel vessel I had used last time for dyeing. In this I added Leaf Green, Lemon Yellow and a dash of Burnt Sienna, all being in 15 ml bottles. I was dyeing 3 hanks (approx 150 gms) of acrylic.
The pic here isn’t great. I was conducting the process in my bathroom, which had no access to natural light ( a fact I realized only after dunking the yarn). So please don’t mind the neon shade of green! 😀
Step 3: I put on a pair of gloves and got to work ensuring the color reached every bit. Then I let it sit in the color for about 15 minutes, and then hung it over the tap to drip into the vessel. This was finally hung in the balcony to dry out for the rest of the day.
Step 4: I washed the acrylic to check for color fastness. Unfortunately it was not color fast. I remembered to put in salt to hold the color. And surprisingly it did hold. The yarn went back into the balcony for drying out.
The final effect is an ombre-like gradient in green. But without the flow of color. It simply became patchy where the darker color settled at the base…
I wanted to try once more to check for the amount of color required. So I dyed a single skein in Magenta. The experiment wasn’t really a resounding success. Apparently you need the amount of color concentration for it to hold onto the yarn. 🙁 The pink almost seems faded…
By this time the original skeins had dried out, and so I wound one up to see how it worked for a project. I made a doily and a knit swatch to display the colors.
Finally I would say that, if you can manage, go ahead with wall paint. Else acrylic colors aren’t bad at all! 😀
Have fun! 🙂
3 thoughts on “When I Dyed….”
The video she references shows bottled craft level acyclic paints: here is the video https://www.youtube.com/watch?v=llsZ5NdN2eQ
Nice try!! hope to get to see the dyed yarn soon 🙂
oh yes! Welcome anytime to check it out! 😀